QINGDAO BOXWELL CONTAINER CO. IS THE OFFICAL MANUFACTURING PARTNER OF BOXWELL LLC.
| Quantity: | |
|---|---|
40ft
Boxwell
The 40FtQ Water Treatment Container is designed as a customized enclosure for packaged wastewater treatment equipment.
The container structure and internal layout can be developed around project-specific equipment dimensions, installation requirements and operating needs, allowing water treatment equipment to be integrated into a transportable containerized module.
With an external dimension of 12192 × 2438 × 2591 mm, the 20 configuration provides sufficient space for integrating water treatment equipment and associated components within a customized steel enclosure. the container with CSC certification for easy shipping transportion
water treatment container with flanges inlet and outlet , so that sewage water comes in and clean water comes out after treatment , a divider wall can be added to separate the room of machinery and the water tank , laddeds can be added
The internal dimensions are determined according to the final design rather than being fixed, allowing the internal arrangement to be adapted to the actual equipment configuration.
The container uses a reinforced structural design suitable for customized equipment installation.
Available steel materials include:
● Corten Steel
● Q235B
● Q355B
The final steel grade and structural arrangement should be selected according to the approved design, equipment loads and project requirements.
For projects requiring enhanced corrosion protection, the steel structure can undergo Sa2.5 abrasive blasting before painting.
The coating system includes:
● Zinc-rich epoxy primer
● Epoxy intermediate coat
● Polyurethane top coat
Paint thickness and coating adhesion are inspected as part of the coating quality control process.
Special paint applied to the inner tank surface , so that it would not rust during the years of water operation
The container can be customized according to the requirements of the water treatment project.
Available customization can include:
● Container dimensions
● Steel material
● Internal equipment layout
● Doors and access arrangements
● Thermal insulation
● Sound insulation
● Exterior color
● Customer logo
● Electrical provisions
● Shelving and accessories
● Project-specific structural requirements
This project-based approach allows the enclosure to be matched to the equipment rather than forcing the equipment into a fixed standard layout.
The 40ft Water Treatment Container is primarily intended for the integration of packaged wastewater treatment equipment into a transportable modular enclosure. The system can be custom designed and pre-installed within ISO shipping container dimensions, allowing transportation by land or sea with reduced onsite installation requirements.
The container can serve as the structural enclosure for a packaged wastewater treatment plant, providing space for project-specific treatment equipment and associated components.
The exact treatment process and equipment configuration should be determined by the water treatment system design and project specification.
Containerized water treatment systems are used in municipal, community and similar wastewater treatment applications where modular equipment deployment is beneficial. Municipal wastewater and domestic/urban wastewater treatment are typical applications for this type of containerized solution.
The container can also provide a modular equipment enclosure for industrial wastewater treatment projects where treatment equipment needs to be assembled within a transportable structure.
The actual treatment technology, capacity and process arrangement depend on the equipment installed inside the container.
A containerized configuration can be useful where treatment equipment needs to be transported to a project location and installed with reduced onsite construction work.
The modular nature of water treatment containers is also useful where portability and shorter preparation time are important.
Because the equipment is integrated within a containerized structure, the complete module can be transported more conveniently than a conventional site-built equipment room, subject to the final equipment configuration and transportation requirements.
Specification | Details |
Product Name | Customized 40HQ Water Treatment Container |
External Dimension | 12192× 2438 × 2591 mm |
Internal Dimension | As Design |
Steel Material | Corten Steel / Q235B / Q355B |
Thermal / Sound Insulation | Optional |
Color | As Request |
Certification Options | CCS / LR / ABS / BV |
Depending on project requirements, the following documentation can be provided:
DNV-ST-E271 Certification
CSC Plate (Optional)
Third-Party Inspection Certificate
Welding Records
NDT Reports
Load Test Reports
Paint Inspection Reports
Dimensional Inspection Reports
User Manual
Packing List
Every offshore container passes through a complete manufacturing process under strict quality control.
We were established in May 2020 in Jiaozhou, Qingdao.
Our manufacturing facility covers approximately 60,000 m², including around 32,000 m² of workshop space, with more than 200 workers.
We develop and manufacture a broad range of container products for domestic and overseas markets.
Our core engineering and R&D team has more than 20 years of industry experience in offshore containers, special containers and customized equipment solutions.
This experience supports customized industrial equipment container projects where structural design needs to be developed around internal equipment and project-specific operating requirements.
We support both:
● Manufacturing according to customer drawings and technical specifications
● In-house design and development of non-standard container products
Our engineering team can participate from initial requirements and concept development through final manufacturing.
This capability is particularly relevant to water treatment containers because internal layouts and equipment interfaces vary between individual treatment projects.
Structured Quality Management
Our quality system covers:
● Raw material inspection
● Production process monitoring
● Final product testing
We also use testing equipment to support product consistency and performance verification.
We can design and manufacture products according to international and project-specific requirements, including DNV 2.7-1, EN 12079, CSC and ISO where applicable.
For a water treatment container, the applicable standard should be selected according to the actual project rather than applying every available certification to every product.
We cooperate with independent inspection agencies and classification societies when required by the project.
This allows inspection and certification requirements to be incorporated into the manufacturing plan before production.
Our services cover key stages of customized container projects, including:
● Pre-sales technical consultation
● Engineering and solution design
● Manufacturing
● Production monitoring
● Quality control
● Third-party inspection coordination
● Certification support
● Logistics and shipment coordination
● After-sales technical support
It is a customized 40HQ steel container designed to accommodate packaged wastewater treatment equipment.
The equipment layout and internal configuration can be developed according to the actual water treatment system and project requirements.
The external dimensions are:
12192 × 2438 × 2896 mm
No. The internal dimensions are determined according to the customized project design.
Available steel materials include:
● Corten Steel
● Q235B
● Q355B
The final material should be selected according to the approved structural design and project requirements.
Yes. We support manufacturing based on customer drawings, technical specifications and project requirements.
It is recommended to provide equipment drawings, dimensions and layout requirements before engineering review.
Yes. Thermal and sound insulation are optional configurations for this product.
The final insulation requirement should be determined according to the equipment and operating environment.
The product is a customized Water Treatment Container capable of accommodating a packaged wastewater treatment plant. A particular treatment technology such as MBR, MBBR or RO is not specified.
Any specific treatment process should therefore be confirmed according to the actual equipment package and project scope.
Certification options include:
● CCS
● LR
● ABS
● BV
The required certification should be confirmed according to the individual project.
DNV-ST-E271 certification can be provided depending on project requirements.
It should only be specified where the actual application and approved design require offshore container certification.
For a customized water treatment container project, it is recommended to provide:
● Water treatment equipment drawings
● Equipment dimensions
● Equipment weight
● Required container dimensions
● Internal layout
● Equipment support requirements
● Door and maintenance access requirements
● Thermal or sound insulation requirements
● Electrical requirements
● Required steel material
● Required certification
● Transportation requirements
● Quantity
● Destination
● Other technical specifications
Our engineering team can review the information and develop the corresponding customized container solution.
Looking for a reliable offshore container manufacturer?
Our engineering team is ready to provide customized solutions, technical support, and competitive quotations for your next offshore project.
Contact Boxwell today to request a quotation, technical drawings, or product brochure and discover why customers around the world trust us for safe, certified offshore cargo solutions.
